Double Flanged Loose Sleeve Force Transfer Compensation Joint (Type C2F)
2.Easy to install, disassemble and maintain;
3.When combined with pump, valve and other accessories installation, it can effectively compensate for the size error of pipeline reservation through expansion and contraction, which makes the installation more convenient;
4.Good water tightness and air tightness.
Used in water supply and drainage, oil and gas pipelines to transfer the pressure thrust of the connection and compensate for the installation error of the pipe, do not absorb axial displacement, and most are connected to pump, valve and other accessories.
|Standards||Design Standards||GB/T 12465|
|Face-to-face dimension||GB/T 12465|
|Flange Standards||GB/T 17241.6, EN 1092|
|Pressure Test Standards||GB/T 12465|
|Pressure Rating||0.25 MPa ~ 4.0 MPa|
|Nominal Diameter||DN100 ~ DN4000|
|Major Component Materials||Valve Body||Ductile Iron, Carbon Steel, Stainless Steel,|
|Valve Disc||Ductile Iron, Carbon Steel, Stainless Steel,|
|Limit Screw, Stud||Carbon Steel, Alloy Steel, Stainless Steel|
|Seal Ring||NBR, EPDM|