Check Valve
-
Casting / Forged Axial Flow Check Valve for oil, & water
Axial flow check valve uses fully welded ball valve body, attractive appearance, eliminate the possibility of media leakage, unique multiple sealing structure, N type nylon sealing for the first seal, V-shaped fluorine rubber seal for the second seal, metal seal for the third seal, non-metal sealing surface has strong pitting corrosion resistance, metal seal meets the requirement of fire prevention design, the service life of the product is long, and can achieve the same life as the pipe.
-
Tilted Plate Metal Seated Slow Closed Check Valve
This series of valves can adjust the torque generated by the large rocking arm by adjusting the position of the counterweight block in the large rocking arm and / or by adjusting the flow rate through the regulating valve of the cylinder before use. The pipe is installed at the water pump outlet to prevent the medium incurrent and eliminate the destructive water hammer, and can effectively reduce the valve closed water hammer pressure to ensure the safe operation of the pipe network. Automatically eliminate the destructive water hammer to protect the pumps and lines from damage.
